sys64738

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

====== Determine network driver in use ======

  ethtool -i <network card>
  
  <network card> can be eth0 etc.

Example output:
  
  driver: e1000\\
  version: 7.3.21-k4.1-NAPI\\
  firmware-version: N/A\\
  bus-info: 0000:02:00.0

The bus-info can be coupled with lspci
   lspci -s -v "2:"
Where 2: is taken from ethtool bus-info.

  02:00.0 Ethernet controller: Intel Corporation 82545EM Gigabit Ethernet Controller (Copper) (rev 01)
        Subsystem: VMware PRO/1000 MT Single Port Adapter
        Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 59
        Memory at d8920000 (64-bit, non-prefetchable) [size=128K]
        Memory at d8900000 (64-bit, non-prefetchable) [size=64K]
        I/O ports at 2000 [size=64]
        [virtual] Expansion ROM at dc400000 [disabled] [size=64K]
        Capabilities: [dc] Power Management version 2
        Capabilities: [e4] PCI-X non-bridge device

sys64738

User Tools

Site Tools

Page Tools