This shows you the differences between two versions of the page.
raid_controller_utils [2013/01/25 14:36] root |
raid_controller_utils [2014/10/22 10:05] (current) root |
||
---|---|---|---|
Line 1: | Line 1: | ||
====== HP Raid Utils ====== | ====== HP Raid Utils ====== | ||
+ | |||
+ | HP has replaced command tool hpacucli with hpssacli for later versions of HP Raid Controllers. This is really stupid done by HP. The genius changing a command name should be punished by whip. | ||
+ | |||
+ | In order to get my existing scripts to work, I have created a soft link from hpacucli -> hpssacli in /usr/sbin. | ||
# hpacucli ctrl all show config | # hpacucli ctrl all show config | ||
Line 14: | Line 18: | ||
| | ||
/tmp/test is output file for result | /tmp/test is output file for result | ||
+ | |||
+ | ===== Spare drives ===== | ||
+ | |||
+ | ==== Remove spare drives ==== | ||
+ | |||
+ | Remove spare drive from Array I | ||
+ | |||
+ | # hpacucli ctrl slot=1 array I remove spares=4E:1:17 | ||
+ | | ||
+ | ==== Adding spare drives ==== | ||
+ | |||
+ | Add two global hot spares | ||
+ | |||
+ | # hpacucli ctrl slot=1 array all add spares=2E:1:18,4E:1:17 | ||
===== Smartctl hints for HP smart array (CCISS driver) ===== | ===== Smartctl hints for HP smart array (CCISS driver) ===== | ||
Line 150: | Line 168: | ||
===== List physical disks (PD) ===== | ===== List physical disks (PD) ===== | ||
- | # /opt/MegaRAID/MegaCli/MegaCli64 -PDlist -aALL | + | # /opt/MegaRAID/MegaCli/MegaCli64 -PDlist -aALL |
===== List thorough information indcluding LD & PD ===== | ===== List thorough information indcluding LD & PD ===== | ||
Line 253: | Line 271: | ||
# /opt/MegaRAID/MegaCli/MegaCli64 -AdpAllInfo -aAll | # /opt/MegaRAID/MegaCli/MegaCli64 -AdpAllInfo -aAll | ||
- | Adapter #0 | + | |
- | ============================================================================== | + | ===== Battery check ===== |
- | Versions | + | # /opt/MegaRAID/MegaCli/MegaCli64 -AdpBbuCmd -aAll |
- | ================ | + | |
- | Product Name : ServeRAID M5110 | + | |
- | Serial No : SV23610722 | + | |
- | FW Package Build: 23.7.0-0037 | + | |
| | ||
- | Mfg. Data | ||
- | ================ | ||
- | Mfg. Date : 09/05/12 | ||
- | Rework Date : 00/00/00 | ||
- | Revision No : 27E | ||
- | Battery FRU : N/A | ||
- | | ||
- | Image Versions in Flash: | ||
- | ================ | ||
- | BIOS Version : 5.30.00_4.12.05.00_0x05160000 | ||
- | FW Version : 3.190.35-1786 | ||
- | NVDATA Version : 2.1206.03-0105 | ||
- | WebBIOS Version : 6.1-45-e_45-Rel | ||
- | Preboot CLI Version: 05.04-05:#%00011 | ||
- | Boot Block Version : 2.05.00.00-0007 | ||
- | BOOT Version : 07.26.13.219 | ||
- | | ||
- | Pending Images in Flash | ||
- | ================ | ||
- | None | ||
- | | ||
- | PCI Info | ||
- | ================ | ||
- | Controller Id : 0000 | ||
- | Vendor Id : 1000 | ||
- | Device Id : 005b | ||
- | SubVendorId : 1014 | ||
- | SubDeviceId : 040b | ||
- | | ||
- | Host Interface : PCIE | ||
- | | ||
- | ChipRevision : D1 | ||
- | | ||
- | Link Speed : 0 | ||
- | Number of Frontend Port: 0 | ||
- | Device Interface : PCIE | ||
- | | ||
- | Number of Backend Port: 8 | ||
- | Port : Address | ||
- | 0 500507603e839210 | ||
- | 1 500507603e83bd90 | ||
- | 2 0000000000000000 | ||
- | 3 0000000000000000 | ||
- | 4 0000000000000000 | ||
- | 5 0000000000000000 | ||
- | 6 0000000000000000 | ||
- | 7 0000000000000000 | ||
- | | ||
- | HW Configuration | ||
- | ================ | ||
- | SAS Address : 500605b005302c40 | ||
- | BBU : Present | ||
- | Alarm : Present | ||
- | NVRAM : Present | ||
- | Serial Debugger : Present | ||
- | Memory : Present | ||
- | Flash : Present | ||
- | Memory Size : 512MB | ||
- | TPM : Absent | ||
- | On board Expander: Absent | ||
- | Upgrade Key : Present | ||
- | Temperature sensor for ROC : Present | ||
- | Temperature sensor for controller : Absent | ||
- | | ||
- | ROC temperature : 75 degree Celcius | ||
- | | ||
- | Settings | ||
- | ================ | ||
- | Current Time : 14:30:0 1/25, 2013 | ||
- | Predictive Fail Poll Interval : 300sec | ||
- | Interrupt Throttle Active Count : 16 | ||
- | Interrupt Throttle Completion : 50us | ||
- | Rebuild Rate : 30% | ||
- | PR Rate : 30% | ||
- | BGI Rate : 30% | ||
- | Check Consistency Rate : 30% | ||
- | Reconstruction Rate : 30% | ||
- | Cache Flush Interval : 4s | ||
- | Max Drives to Spinup at One Time : 2 | ||
- | Delay Among Spinup Groups : 12s | ||
- | Physical Drive Coercion Mode : 1GB | ||
- | Cluster Mode : Disabled | ||
- | Alarm : Disabled | ||
- | Auto Rebuild : Enabled | ||
- | Battery Warning : Enabled | ||
- | Ecc Bucket Size : 15 | ||
- | Ecc Bucket Leak Rate : 1440 Minutes | ||
- | Restore HotSpare on Insertion : Disabled | ||
- | Expose Enclosure Devices : Enabled | ||
- | Maintain PD Fail History : Enabled | ||
- | Host Request Reordering : Enabled | ||
- | Auto Detect BackPlane Enabled : SGPIO/i2c SEP | ||
- | Load Balance Mode : Auto | ||
- | Use FDE Only : Yes | ||
- | Security Key Assigned : No | ||
- | Security Key Failed : No | ||
- | Security Key Not Backedup : No | ||
- | Default LD PowerSave Policy : Controller Defined | ||
- | Maximum number of direct attached drives to spin up in 1 min : 10 | ||
- | Auto Enhanced Import : No | ||
- | Any Offline VD Cache Preserved : No | ||
- | Allow Boot with Preserved Cache : No | ||
- | Disable Online Controller Reset : No | ||
- | PFK in NVRAM : No | ||
- | Use disk activity for locate : No | ||
- | POST delay : 90 seconds | ||
- | BIOS Error Handling : Stop On Errors | ||
- | Current Boot Mode :Normal | ||
- | Capabilities | ||
- | ================ | ||
- | RAID Level Supported : RAID0, RAID1, RAID5, RAID00, RAID10, RAID50, PRL 11, PRL 11 with spanning, SRL 3 supported, PRL11-RLQ0 DDF layout with no span, PRL11-RLQ0 DDF layout with span | ||
- | Supported Drives : SAS, SATA | ||
- | | ||
- | Allowed Mixing: | ||
- | | ||
- | Mix in Enclosure Allowed | ||
- | | ||
- | Status | ||
- | ================ | ||
- | ECC Bucket Count : 0 | ||
- | | ||
- | Limitations | ||
- | ================ | ||
- | Max Arms Per VD : 32 | ||
- | Max Spans Per VD : 8 | ||
- | Max Arrays : 128 | ||
- | Max Number of VDs : 64 | ||
- | Max Parallel Commands : 1008 | ||
- | Max SGE Count : 60 | ||
- | Max Data Transfer Size : 8192 sectors | ||
- | Max Strips PerIO : 42 | ||
- | Max LD per array : 16 | ||
- | Min Strip Size : 8 KB | ||
- | Max Strip Size : 1.0 MB | ||
- | Max Configurable CacheCade Size: 0 GB | ||
- | Current Size of CacheCade : 0 GB | ||
- | Current Size of FW Cache : 366 MB | ||
- | | ||
- | Device Present | ||
- | ================ | ||
- | Virtual Drives : 6 | ||
- | Degraded : 0 | ||
- | Offline : 0 | ||
- | Physical Devices : 33 | ||
- | Disks : 30 | ||
- | Critical Disks : 0 | ||
- | Failed Disks : 0 | ||
- | | ||
- | Supported Adapter Operations | ||
- | ================ | ||
- | Rebuild Rate : Yes | ||
- | CC Rate : Yes | ||
- | BGI Rate : Yes | ||
- | Reconstruct Rate : Yes | ||
- | Patrol Read Rate : Yes | ||
- | Alarm Control : Yes | ||
- | Cluster Support : Yes | ||
- | BBU : Yes | ||
- | Spanning : Yes | ||
- | Dedicated Hot Spare : Yes | ||
- | Revertible Hot Spares : Yes | ||
- | Foreign Config Import : Yes | ||
- | Self Diagnostic : Yes | ||
- | Allow Mixed Redundancy on Array : No | ||
- | Global Hot Spares : Yes | ||
- | Deny SCSI Passthrough : No | ||
- | Deny SMP Passthrough : No | ||
- | Deny STP Passthrough : No | ||
- | Support Security : Yes | ||
- | Snapshot Enabled : No | ||
- | Support the OCE without adding drives : Yes | ||
- | Support PFK : Yes | ||
- | Support PI : Yes | ||
- | Support Boot Time PFK Change : Yes | ||
- | Disable Online PFK Change : Yes | ||
- | Support LDPI Type1 : No | ||
- | Support LDPI Type2 : No | ||
- | Support LDPI Type3 : No | ||
- | PFK TrailTime Remaining : 0 days 0 hours | ||
- | Support Shield State : Yes | ||
- | Block SSD Write Disk Cache Change: Yes | ||
- | | ||
- | Supported VD Operations | ||
- | ================ | ||
- | Read Policy : Yes | ||
- | Write Policy : Yes | ||
- | IO Policy : Yes | ||
- | Access Policy : Yes | ||
- | Disk Cache Policy : Yes | ||
- | Reconstruction : Yes | ||
- | Deny Locate : No | ||
- | Deny CC : No | ||
- | Allow Ctrl Encryption: No | ||
- | Enable LDBBM : No | ||
- | Support Breakmirror : No | ||
- | Power Savings : No | ||
- | | ||
- | Supported PD Operations | ||
- | ================ | ||
- | Force Online : Yes | ||
- | Force Offline : Yes | ||
- | Force Rebuild : Yes | ||
- | Deny Force Failed : No | ||
- | Deny Force Good/Bad : No | ||
- | Deny Missing Replace : No | ||
- | Deny Clear : No | ||
- | Deny Locate : No | ||
- | Support Temperature : Yes | ||
- | Disable Copyback : No | ||
- | Enable JBOD : No | ||
- | Enable Copyback on SMART : No | ||
- | Enable Copyback to SSD on SMART Error : Yes | ||
- | Enable SSD Patrol Read : No | ||
- | PR Correct Unconfigured Areas : Yes | ||
- | Error Counters | ||
- | ================ | ||
- | Memory Correctable Errors : 0 | ||
- | Memory Uncorrectable Errors : 0 | ||
- | | ||
- | Cluster Information | ||
- | ================ | ||
- | Cluster Permitted : Yes | ||
- | Cluster Active : No | ||
- | | ||
- | Default Settings | ||
- | ================ | ||
- | Phy Polarity : 0 | ||
- | Phy PolaritySplit : 0 | ||
- | Background Rate : 30 | ||
- | Strip Size : 128kB | ||
- | Flush Time : 4 seconds | ||
- | Write Policy : WB | ||
- | Read Policy : Adaptive | ||
- | Cache When BBU Bad : Disabled | ||
- | Cached IO : No | ||
- | SMART Mode : Mode 6 | ||
- | Alarm Disable : No | ||
- | Coercion Mode : 1GB | ||
- | ZCR Config : Unknown | ||
- | Dirty LED Shows Drive Activity : No | ||
- | BIOS Continue on Error : 0 | ||
- | Spin Down Mode : None | ||
- | Allowed Device Type : SAS/SATA Mix | ||
- | Allow Mix in Enclosure : Yes | ||
- | Allow HDD SAS/SATA Mix in VD : No | ||
- | Allow SSD SAS/SATA Mix in VD : No | ||
- | Allow HDD/SSD Mix in VD : No | ||
- | Allow SATA in Cluster : No | ||
- | Max Chained Enclosures : 16 | ||
- | Disable Ctrl-R : Yes | ||
- | Enable Web BIOS : Yes | ||
- | Direct PD Mapping : No | ||
- | BIOS Enumerate VDs : Yes | ||
- | Restore Hot Spare on Insertion : No | ||
- | Expose Enclosure Devices : Yes | ||
- | Maintain PD Fail History : Yes | ||
- | Disable Puncturing : Yes | ||
- | Zero Based Enclosure Enumeration : No | ||
- | PreBoot CLI Enabled : Yes | ||
- | LED Show Drive Activity : Yes | ||
- | Cluster Disable : No | ||
- | SAS Disable : No | ||
- | Auto Detect BackPlane Enable : SGPIO/i2c SEP | ||
- | Use FDE Only : Yes | ||
- | Enable Led Header : No | ||
- | Delay during POST : 0 | ||
- | EnableCrashDump : No | ||
- | Disable Online Controller Reset : No | ||
- | EnableLDBBM : No | ||
- | Un-Certified Hard Disk Drives : Allow | ||
- | Treat Single span R1E as R10 : No | ||
- | Max LD per array : 16 | ||
- | Power Saving option : All power saving options are disabled | ||
- | Default spin down time in minutes: 30 | ||
- | Enable JBOD : No | ||
- | TTY Log In Flash : No | ||
- | Auto Enhanced Import : No | ||
- | BreakMirror RAID Support : No | ||
- | Disable Join Mirror : No | ||
- | Enable Shield State : Yes | ||
- | Time taken to detect CME : 60s | ||
- | | ||
- | Exit Code: 0x00 | ||
- | |||