san_fc
Differences
This shows you the differences between two versions of the page.
|
san_fc [2012/05/30 11:12] root |
san_fc [2013/12/18 12:40] (current) root |
||
|---|---|---|---|
| Line 1: | Line 1: | ||
| ====== FC ====== | ====== FC ====== | ||
| - | ===== Determine FC ID (WWN) and FC firmware ===== | + | ===== Determine FC ID (WWN) ===== |
| - | RHEL 4.x or earlier, to find the WWN run the cat /proc/scsi/adapter_type/n command, where adapter_type is the host adapter type, and n is the host adapter number for your card. In most cases, the adapter type is qla2xxx. | + | ==== RHEL 4.x or earlier ==== |
| + | |||
| + | To find the WWN run the cat /proc/scsi/adapter_type/n command, where adapter_type is the host adapter type, and n is the host adapter number for your card. In most cases, the adapter type is qla2xxx. | ||
| cat /proc/scsi/adapter_type/<n> | cat /proc/scsi/adapter_type/<n> | ||
| - | RHEL 5.x or later, the adapter WWN information can be found: | + | ==== RHEL 5.x or later ==== |
| + | |||
| + | The adapter WWN information can be found: | ||
| cat /sys/class/fc_host/host<n>/port_name | cat /sys/class/fc_host/host<n>/port_name | ||
| Line 13: | Line 17: | ||
| cat /sys/class/fc_host/host5/port_name | cat /sys/class/fc_host/host5/port_name | ||
| 0x5001438002a30302 | 0x5001438002a30302 | ||
| + | |||
| + | |||
| + | ===== Determine if FC link is online ===== | ||
| + | |||
| + | ==== RHEL 5.x or later ==== | ||
| + | |||
| + | cat /sys/class/fc_host/host*/port_state | ||
| + | |||
| | | ||
| - | ===== HBA brand ===== | + | ===== Find HBA brand ===== |
| + | |||
| + | ==== Method 1 ==== | ||
| lspci | grep -i fibre | lspci | grep -i fibre | ||
| 08:00.0 Fibre Channel: QLogic Corp. ISP2532-based 8Gb Fibre Channel to PCI Express HBA (rev 02) | 08:00.0 Fibre Channel: QLogic Corp. ISP2532-based 8Gb Fibre Channel to PCI Express HBA (rev 02) | ||
| 08:00.1 Fibre Channel: QLogic Corp. ISP2532-based 8Gb Fibre Channel to PCI Express HBA (rev 02) | 08:00.1 Fibre Channel: QLogic Corp. ISP2532-based 8Gb Fibre Channel to PCI Express HBA (rev 02) | ||
| + | | ||
| + | ==== Method 2 ==== | ||
| + | | ||
| + | cat /sys/class/scsi_host/host<n>/model_name | ||
| + | QMH2462 | ||
| + | |||
| + | ===== HBA firmware ===== | ||
| + | |||
| + | cat /sys/class/scsi_host/host<n>/fw_version | ||
| + | |||
| + | cat /sys/class/scsi_host/host[4-5]/fw_version | ||
| + | 5.06.02 (90d5) | ||
| + | 5.06.02 (90d5) | ||
| + | |||
| + | Alternatively: | ||
| + | dmesg | grep fw | ||
| + | |||
| + | Exaample output: | ||
| + | qla2xxx 0000:08:00.0: firmware: requesting ql2500_fw.bin | ||
| + | ISP2532: PCIe (2.5GT/s x8) @ 0000:08:00.0 hdma+, host#=4, fw=5.06.02 (90d5) | ||
| + | ISP2532: PCIe (2.5GT/s x8) @ 0000:08:00.1 hdma+, host#=5, fw=5.06.02 (90d5) | ||
| + | |||
| + | |||
| + | | ||
san_fc.1338376339.txt.gz · Last modified: 2012/05/30 11:12 by root
Page Tools
Except where otherwise noted, content on this wiki is licensed under the following license: GNU Free Documentation License 1.3
