User Tools

Site Tools


san_san_lun_information

This is an old revision of the document!


SAN / SAN LUN information

List the multipathing support

mpathadm list mpath-support
mpath-support:  libmpscsi_vhci.so

Choose the mpath support name from the output list

List the multipathing support properties

mpathadm show mpath-support libmpscsi_vhci.so
mpath-support:  libmpscsi_vhci.so
      Vendor:  Sun Microsystems
      Driver Name:  scsi_vhci
      Default Load Balance:  round-robin
      Supported Load Balance Types:  
              round-robin
              logical-block
      Allows To Activate Target Port Group Access:  yes
      Allows Path Override:  no
      Supported Auto Failback Config:  1
      Auto Failback:  on
      Failback Polling Rate (current/max):  0/0
      Supported Auto Probing Config:  0
      Auto Probing:  NA
      Probing Polling Rate (current/max):  NA/NA
      Supported Devices:
              Vendor:  SUN     
              Product:  T300            
              Revision:  
              Supported Load Balance Types:
                      round-robin
      ....
      ....

To Get a List of Logical Units Discovered on the System

mpathadm list lu
      /dev/rdsk/c4t600A0B8000505B5000000D304C10C46Dd0s2
              Total Path Count: 4
              Operational Path Count: 4
      /dev/rdsk/c4t600A0B8000505B5000000D2F4C10C3EDd0s2
              Total Path Count: 4
              Operational Path Count: 4
      /dev/rdsk/c4t600A0B8000505B5000000D2D4C10C34Dd0s2
              Total Path Count: 4
              Operational Path Count: 4

Select a logical unit name from the output.

mpathadm show lu /dev/rdsk/c4t600A0B8000505B5000000D304C10C46Dd0s2
  Logical Unit:  /dev/rdsk/c4t600A0B8000505B5000000D304C10C46Dd0s2
      mpath-support:  libmpscsi_vhci.so
      Vendor:  IBM     
      Product:  1814      FAStT 
      Revision:  0916
      Name Type:  unknown type
      Name:  600a0b8000505b5000000d304c10c46d
      Asymmetric:  yes
      Current Load Balance:  round-robin
      Logical Unit Group ID:  NA
      Auto Failback:  on
      Auto Probing:  NA
      Paths:  
              Initiator Port Name:  210000e08b945795
              Target Port Name:  200500a0b8505d67
              Override Path:  NA
              Path State:  OK
              Disabled:  no
              Initiator Port Name:  210000e08b945795
              Target Port Name:  200400a0b8505d67
              Override Path:  NA
              Path State:  OK
              Disabled:  no
              Initiator Port Name:  210000e08b94ec9a
              Target Port Name:  200500a0b8505d68
              Override Path:  NA
              Path State:  OK
              Disabled:  no
              Initiator Port Name:  210000e08b94ec9a
              Target Port Name:  200400a0b8505d68
              Override Path:  NA
              Path State:  OK
              Disabled:  no
      Target Port Groups:  
              ID:  1
              Explicit Failover:  yes
              Access State:  standby
              Target Ports:
                      Name:  200500a0b8505d67
                      Relative ID:  0
                      Name:  200500a0b8505d68
                      Relative ID:  0
              ID:  2
              Explicit Failover:  yes
              Access State:  active
              Target Ports:
                      Name:  200400a0b8505d67
                      Relative ID:  0
                      Name:  200400a0b8505d68
                      Relative ID:  0

Fail Over a Logical Unit

This operation is applicable only to devices in the following two categories:

  • Unordered List ItemAsymmetric devices with a proprietary failover mechanism recognized and supported by multipathing support
  • Unordered List ItemDevices conforming to the T10 Standard Target Port Group Support libmpscsi_vhci.so and providing explicit mode asymmetric logical unit access
mpathadm show lu <logical-unit-name command>

Example:

  Logical Unit:  /dev/rdsk/c4t600A0B8000505B5000000D304C10C46Dd0s2

mpath-support: libmpscsi_vhci.so
Vendor: IBM
Product: 1814 FAStT
Revision: 0916
Name Type: unknown type
Name: 600a0b8000505b5000000d304c10c46d
Asymmetric: yes
….
….
ID: 1
Explicit Failover: yes
Access State: standby
Target Ports:
Name: 200500a0b8505d67
Relative ID: 0
Name: 200500a0b8505d68
Relative ID: 0
ID: 2
Explicit Failover: yes
Access State: active
Target Ports:
Name: 200400a0b8505d67
Relative ID: 0
Name: 200400a0b8505d68
Relative ID: 0

mpathadm failover lu <logical-unit-name command>

Example:

mpathadm failover lu /dev/rdsk/c4t600A0B8000505B5000000D304C10C46Dd0s2

verify the access state change

mpathadm show lu logical-unit-name 

….
….
Target Port Groups:
ID: 1
Explicit Failover: yes
Access State: active
Target Ports:
Name: 200500a0b8505d67
Relative ID: 0
Name: 200500a0b8505d68
Relative ID: 0
ID: 2
Explicit Failover: yes
Access State: standby
Target Ports:
Name: 200400a0b8505d67
Relative ID: 0
Name: 200400a0b8505d68
Relative ID: 0

Verify the access state change with luxadm

luxadm display /dev/rdsk/c4t600A0B8000505B5000000D304C10C46Dd0s2

DEVICE PROPERTIES for disk: /dev/rdsk/c4t600A0B8000505B5000000D304C10C46Dd0s2
Vendor: IBM
Product ID: 1814 FAStT
Revision: 0916
Serial Num: SK82800386
Unformatted capacity: 61440,000 MBytes
Write Cache: Enabled
Read Cache: Enabled
Minimum prefetch: 0xffff
Maximum prefetch: 0x0
Device Type: Disk device
Path(s):
/dev/rdsk/c4t600A0B8000505B5000000D304C10C46Dd0s2
/devices/scsi_vhci/ssd@g600a0b8000505b5000000d304c10c46d:c,raw
Controller /devices/pci@7c0/pci@0/pci@9/SUNW,qlc@0/fp@0,0
Device Address 200500a0b8505d67,3
Host controller port WWN 210000e08b945795
Class primary
State ONLINE
Controller /devices/pci@7c0/pci@0/pci@9/SUNW,qlc@0/fp@0,0
Device Address 200400a0b8505d67,3
Host controller port WWN 210000e08b945795
Class secondary
State STANDBY
Controller /devices/pci@7c0/pci@0/pci@8/SUNW,qlc@0/fp@0,0
Device Address 200500a0b8505d68,3
Host controller port WWN 210000e08b94ec9a
Class primary
State ONLINE
Controller /devices/pci@7c0/pci@0/pci@8/SUNW,qlc@0/fp@0,0
Device Address 200400a0b8505d68,3
Host controller port WWN 210000e08b94ec9a
Class secondary
State STANDBY

Luxadm port information

luxadm -e port

/devices/pci@7c0/pci@0/pci@8/SUNW,qlc@0/fp@0,0:devctl              CONNECTED
/devices/pci@7c0/pci@0/pci@9/SUNW,qlc@0/fp@0,0:devctl              CONNECTED

Luxadm dump map information

luxadm -e dump_map /devices/pci@7c0/pci@0/pci@9/SUNW,qlc@0/fp@0,0:devctl

Pos  Port_ID Hard_Addr Port WWN         Node WWN         Type\\
0    10100   0         202900a0b82acd3c 200800a0b82acd3c 0x0  (Disk device)
1    10200   0         210000e08b94d494 200000e08b94d494 0x1f (Unknown Type,Host Bus Adapter)

devices = output from luxadm -e port

http://download.oracle.com/docs/cd/E19253-01/820-1931/agkax/index.html

san_san_lun_information.1316435250.txt.gz · Last modified: 2011/09/19 12:27 by root